Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: 2gr-fks Cooling

Reassembly
REASSEMBLY PROCEDURE 1. INSTALL GENERATOR DRIVE END FRAME BEARING (a) Using SST and a press, press in a new generator drive end frame bearing. SST: 09950-60010 09951-00470 SST: ...

Coolant
Replacement REPLACEMENT PROCEDURE 1. REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ Off Road Package) 2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY 3. DRAIN ENGINE COOLANT CAUTION: ...

Other materials:

Operation Check
OPERATION CHECK 1. OPERATION DESCRIPTION (a) Push-button start function: (1) When the electrical key transmitter sub-assembly is in a detection area inside the vehicle and the brake pedal is depressed, the engine is started by pressing the engine switch. (2) When the electrical key transmitt ...

Sound Quality is Bad Only when CD is Played (Volume is Too Low)
PROCEDURE 1. REPLACE CD AND RECHECK (a) Replace the CD with a known good one and check that the malfunction disappears. OK: Malfunction disappears. OK END NG REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY ...

Pressure Control Solenoid "C" Circuit Open (P079513)
DESCRIPTION Changing from 1st to 6th is performed by the ECM turning shift solenoid valves SL1, SL2, SL3 and SL4 on and off. If an open or short circuit occurs in any of the shift solenoid valves, the ECM controls the remaining normal shift solenoid valves to allow the vehicle to be operated ...

2015-2021 © Copyright www.luting.site