Toyota Tacoma 2015-2018 Service Manual: Front Evaporator Temperature Sensor

Toyota Tacoma 2015-2018 Service Manual / Air Conditioning / Front Evaporator Temperature Sensor

Inspection

INSPECTION

PROCEDURE

1. INSPECT COOLER THERMISTOR SENSOR

(a) Check the resistance.

(1) Measure the resistance and check the results in accordance with the values in the table below.

Standard:

Tester Connection	Condition	Specified Condition
1 - 2	-10В°C (14В°F)	7.40 to 9.20 kО©
1 - 2	-5В°C (23В°F)	5.65 to 7.00 kО©
1 - 2	0В°C (32В°F)	4.35 to 5.40 kО©
1 - 2	5В°C (41В°F)	3.40 to 4.20 kО©
1 - 2	10В°C (50В°F)	2.68 to 3.30 kО©
1 - 2	15В°C (59В°F)	2.10 to 2.60 kО©
1 - 2	20В°C (68В°F)	1.66 to 2.10 kО©
1 - 2	25В°C (77В°F)	1.32 to 1.66 kО©
1 - 2	30В°C (86В°F)	1.05 to 1.35 kО©

If the result is not as specified, replace the cooler thermistor sensor.

NOTICE:

Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.
When measuring, the sensor temperature must be almost the same as the ambient temperature.

HINT:

As the temperature increases, the resistance decreases (see the graph on the left).

Front Blower Resistor

Inspection INSPECTION PROCEDURE 1. INSPECT BLOWER RESISTOR (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance ...

Heater Relay

Inspection INSPECTION PROCEDURE 1. INSPECT HEATER RELAY (a) Check the resistance. (1) Using an ohmmeter, measure the resistance between each terminal. Standard: ...

Other materials:

Confirm Vehicle Headunit Functionality
PROCEDURE 1. CHECK CUSTOMER'S CELLULAR PHONE COMPATIBILITY (a) Go to TIS "Bluetooth" Compatibility Portal and check if the cellular phone is compatible. Result Result Proceed to Cellular phone is compatible ...

Luggage compartment features
Behind the rear seat (Double Cab models only) 1.Cargo net hooks (vehicles with sub woofer) 2.Grocery bag hooks 3.Flashlight holder 4.Storage boxes Deck 1. Auxiliary boxes 2. Tie-down cleats 3. Deck hooks Auxiliary boxes Left side 1. Turn the knob counterclockwise. 2. Open the ...

Stereo Component Amplifier
Components COMPONENTS ILLUSTRATION ILLUSTRATION Removal REMOVAL PROCEDURE 1. PRECAUTION NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecti ...