Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Heater Relay

Inspection

INSPECTION

PROCEDURE

1. INSPECT HEATER RELAY

(a) Check the resistance.

(1) Using an ohmmeter, measure the resistance between each terminal.

Standard:

Tester Connection

Specified Condition

3 - 4

Below 1 О©

3 - 4

10 kО© or higher

(Apply battery voltage to terminals 1 and 2)

3 - 5

10 kО© or higher

3 - 5

Below 1 О©

(Apply battery voltage to terminals 1 and 2)

If the result is not as specified, replace the relay.

Front Evaporator Temperature Sensor
Inspection INSPECTION PROCEDURE 1. INSPECT COOLER THERMISTOR SENSOR (a) Check the resistance. (1) Measure the resistance and check the results in accordance with the values in ...

Magnetic Clutch Relay
Inspection INSPECTION PROCEDURE 1. INSPECT MAGNET-CLUTCH RELAY (a) Check the resistance. (1) Using an ohmmeter, measure the resistance between the terminals. Standard: ...

Other materials:

Cruise Control Main Switch
Components COMPONENTS ILLUSTRATION Removal REMOVAL PROCEDURE 1. REMOVE STEERING PAD ASSEMBLY (See page ) 2. REMOVE CRUISE CONTROL MAIN SWITCH (a) Disconnect the connector and remove the 2 screws. (b) Remove the cruise ...

Satellite Radio Broadcast cannot be Received
CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be possible to listen to the broadcast. After replacing the stereo component tuner assem ...

Cruise Control Input Processor (P160700)
DESCRIPTION The ECM continuously monitors its main and sub CPUs. This self-check ensures that the ECM is functioning properly. If outputs from the CPUs are different and deviate from the standard, the ECM will illuminate the MIL and store the DTC. DTC No. Detection Item ...

2015-2022 © Copyright www.luting.site