Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: How To Proceed With Troubleshooting

CAUTION / NOTICE / HINT

HINT:

Use the following procedure to troubleshoot the wireless charging system.

PROCEDURE

1.

VEHICLE BROUGHT TO WORKSHOP

NEXT

2.

CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK

  • In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
  • Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
  • The following 5 items are important points for problem analysis:

    What

    Vehicle model, system name

    When

    Date, time, occurrence frequency

    Where

    Road conditions

    Under what conditions?

    Driving conditions, weather conditions

    How did it happen?

    Problem symptoms

NEXT

3.

INSPECT BATTERY VOLTAGE

(a) Measure the battery voltage.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

NEXT

4.

PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table.

Click here

Result

Proceed to

Fault is not listed in Problem Symptoms Table.

A

Fault is listed in Problem Symptoms Table.

B

B

GO TO STEP 6

A

5.

OVERALL ANALYSIS AND TROUBLESHOOTING

(a) Operation Check.

Click here (b) Terminals of ECU.

(b) Terminals of ECU.

Click here

NEXT

6.

REPAIR OR REPLACE

NEXT

7.

CONFIRMATION TEST

NEXT

END

System Diagram
SYSTEM DIAGRAM ...

Operation Check
OPERATION CHECK 1. CHECK WIRELESS CHARGING SYSTEM OPERATION (a) Turn the ignition switch ON (IG or ACC). (b) Press the mobile wireless charger switch and check that the switch indicator light ill ...

Other materials:

Control Module Communication Bus OFF (U0073,U0100,U0124,U0126)
DESCRIPTION The skid control ECU (brake actuator assembly) receives the signals from the ECM, steering angle sensor (spiral cable with sensor sub-assembly), 4 wheel drive control ECU*, and yaw rate and acceleration sensor (airbag sensor assembly) via the CAN communication system. *: f ...

SRS airbags
The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can he ...

Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL 2. INSPECT FRONT SUSPENSION LOWER ARM (a) Install the hub nuts onto the disc. (b) Using a dial indicator, check the lower ball joint for excessive play when you push the hub nuts up and down with a force of 294 N (30 kgf, 66 lbf). Maximum: 0.5 mm ( ...

2015-2022 © Copyright www.luting.site