Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. INSTALL FRONT LOWER ARM BUSH NO. 1

(a) Install a new lower arm bush using SST, a press and steel plate.

(a) Install a new lower arm bush using SST, a press and steel plate.

SST: 09631-12090

SST: 09631-32020

NOTICE:

Push the lower arm bush in until the bush positioning protrusions come to the positions shown in the illustration.

2. INSTALL FRONT LOWER ARM BUSH NO. 2

(a) Install a new lower arm bush using SST, a press and steel plate.

(a) Install a new lower arm bush using SST, a press and steel plate.

SST: 09502-12010

SST: 09631-12090

NOTICE:

Push the lower arm bush in until the bush positioning protrusions come to the positions shown in the illustration.

Installation
INSTALLATION PROCEDURE 1. TEMPORARILY TIGHTEN FRONT SUSPENSION LOWER ARM (a) Align the matchmarks on the camber adjust cam No. 2 and toe adjust cam. Temporarily tighten the bolt and the nut. ( ...

Front Shock Absorber
...

Other materials:

Transfer Shift Motor Control Circuit High (P17AA)
DESCRIPTION This DTC is output when a short to B+ in the transfer shift motor and A.D.D. shift motor drive circuit is detected. DTC No. Detection Item DTC Detection Condition Trouble Area P17AA Transfer Shift Motor Control C ...

Front Speed Sensor RH Malfunction (C1401,C1402)
DESCRIPTION The speed sensor detects wheel speed and sends the appropriate signals to the skid control ECU (brake actuator assembly). These signals are used for brake control. The speed sensor rotors have rows of alternating N and S magnetic poles and their magnetic fields change when the roto ...

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for both the LH and RH sides. The procedure described below is for the LH side. PROCEDURE 1. REMOVE FRONT NO. 1 WHEEL OPENING EXTENSION PAD Click here 2. SEPARATE FRONT FENDER LINER (a) Remove the 2 ...

2015-2022 © Copyright www.luting.site