Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Reassembly

REASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for both the LH and RH sides.
  • The procedure described below is for the LH side.

PROCEDURE

1. INSTALL FOG LIGHT BULB

(a) Turn the fog light bulb in the direction indicated by the arrow in the illustration to install it.

NOTICE:

Do not touch the fog light bulb glass.

Adjustment
ADJUSTMENT PROCEDURE 1. PREPARE VEHICLE FOR FOG LIGHT AIMING ADJUSTMENT (a) Prepare the vehicle: HINT: Ensure that there is no damage or deformation to the body around the fog lights. ...

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for both the LH and RH sides. The procedure described below is for the LH side. PROCEDURE 1. INSTALL FOG LIGHT ...

Other materials:

Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE: Always use a new grommet and valve core when installing the tire pressure warning valve and transmitter. Check that the washer and nut are not damaged, and replace them if necessary. If installing a new tire pressure warning valv ...

Removal
REMOVAL PROCEDURE 1. PRECAUTION CAUTION: Be sure to read Precaution thoroughly before servicing (See page ). NOTICE: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the ...

Disposal
DISPOSAL CAUTION / NOTICE / HINT CAUTION: Before performing pre-disposal deployment of any SRS part, review and closely follow all applicable environmental and hazardous material regulations. Pre-disposal deployment may be considered hazardous material treatment. PROCEDURE 1. PRECAUTION ...

2015-2023 © Copyright www.luting.site