Toyota Tacoma manuals

Toyota Tacoma 2015-2018 Service Manual: Reassembly

REASSEMBLY

PROCEDURE

1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

(a) Provisionally tighten the bleeder plug to the disc brake cylinder.

(b) Install the bleeder plug cap onto the bleeder plug.

2. INSTALL PISTON SEAL

(a) Apply lithium soap base glycol grease to 4 new piston seals.

(b) Install the 4 piston seals onto the disc brake cylinder.

3. INSTALL FRONT DISC BRAKE PISTON

(a) Apply lithium soap base glycol grease to the 4 disc brake pistons and a new 4 cylinder boots.

(b) Install the 4 disc brake pistons onto the disc brake cylinder.

NOTICE:

Do not install the disc brake piston into the disc brake cylinder forcibly.

4. INSTALL CYLINDER BOOT

(a) Install the 4 cylinder boots onto the disc brake cylinder.

HINT:

Install the cylinder boot securely onto the grooves of the disc brake cylinder and piston.

(b) Install the 4 cylinder boot set rings.

Installation
INSTALLATION PROCEDURE 1. INSTALL FRONT DISC (a) Align the matchmarks of the front disc and the front axle hub and install the front disc. Text in Illustration ...

Hydraulic Brake Booster
...

Other materials:

Terminals Of Ecu
TERMINALS OF ECU 1. CLEARANCE WARNING ECU ASSEMBLY (a) Disconnect the C30 connector from the clearance warning ECU assembly. (b) Measure the voltage and resistance according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Descr ...

Inspection
INSPECTION PROCEDURE 1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Power Slide Type) *a Component without harness connected (Power Window Regulator Motor Assembly) *b Clockwise *c Counterclockwise ...

Problem Symptoms Table
PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each sy ...

2015-2022 © Copyright www.luting.site