SYSTEM DESCRIPTION
1. LIN COMMUNICATION SYSTEM DESCRIPTION
The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of an open in the communication lines or other reasons, the master control ECU of the relevant system will store a DTC. Refer to the table below about the communication bus lines and connected components.
HINT:
Component |
Master Control |
LIN Communication DTC Output Function |
---|---|---|
Main Body ECU (Multiplex Network Body ECU) |
в—‹ |
в—‹ |
Front Power Window Regulator Motor Assembly LH*1 |
- |
- |
Front Power Window Regulator Motor Assembly RH*1 |
- |
- |
Power Window Regulator Master Switch Assembly*1 |
- |
- |
Sliding Roof ECU (Sliding Roof Drive Gear Sub-assembly)*2 |
- |
- |
Component |
Master Control |
LIN Communication DTC Output Function |
---|---|---|
Certification ECU (Smart Key ECU Assembly) |
в—‹ |
в—‹ |
Steering Lock ECU (Steering Lock Actuator or Upper Bracket Assembly) |
- |
- |
Transmitter ID1 Operation Stop (C2111/11-C2114/14)
DESCRIPTION
The tire pressure warning valve and transmitters that are installed in the tire
and wheel assemblies measure the tire pressure of each wheel. The measured values
are transmitted to the tire pressure warning ECU and receiver in the vehicle as
radio waves. The ECU compares the measu ...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the LIN communication system.
*: Use the Techstream.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
...
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT
HINT:
Use the following procedure to troubleshoot the wireless charging system.
PROCEDURE
1.
VEHICLE BROUGHT TO WORKSHOP
NEXT
2.
CUSTOMER PROBLEM ANALY ...